Refine By
Same Day Dispatch
Give your indoor LED signage and display lighting the stable power it deserves.
Eurotech’s range of 12 V indoor LED transformers is designed for sign shops, print houses, shopfitters and electrical contractors across Australia who need reliable, compliant and easy to install drivers for everyday projects.
Whether you are powering a small menu board in Perth, a retail lightbox in Sydney or long runs of strip lighting in a Brisbane showroom, these indoor transformers deliver consistent 12 V DC output and the protection your LED systems need.
These indoor LED transformers are ideal for:
Slim LED lightboxes and menu boards in cafés, quick service and retail
Illuminated signs and logo boxes behind acrylic or polycarbonate faces
LED strip and module lighting in shelving, cabinets and display units
Indoor feature lighting on shopfronts, reception areas and point of sale
Moving signs or display systems that need a 12 V constant voltage supply
All models are non dimmable, making them perfect where a steady, flicker free light level is more important than brightness control.
Built for Australian mains power
All drivers accept 220–240 V AC, 50/60 Hz, so they are ready for installations from Melbourne to Darwin without special provisions.
Stable constant voltage output
Designed specifically for 12 V LED loads, keeping brightness consistent and protecting modules and strips from over-voltage.
Full electronic protection
Integrated short circuit, overload, over voltage and over temperature protection helps safeguard both the driver and your LEDs if something goes wrong during installation or operation.
Fast, tidy installation
AU plug fitted on the input side for quick testing and temporary hook-ups.
Screw terminals on the output side with clearly marked polarity.
Slim plastic housings that are easy to conceal in sign trays, ceilings or cabinets.
Trade only, backed by Eurotech
Eurotech supplies the print and signage trade only, so you are never competing with your own supplier. Combine your transformers with frames, media and hardware on the same order, with free delivery Australia wide on eligible orders.
Yes. All models are designed for 220–240 V AC, 50/60 Hz, so they are suitable for standard mains power across Australia, including Perth, Sydney, Melbourne, Brisbane, Adelaide and regional areas.
No. This range is non dimmable. They are designed for applications where you want steady, consistent light output rather than brightness control. If you need dimming, your electrician will need to specify a compatible dimmable driver.
No. These units are IP20, which means indoor, dry locations only. For external lightboxes or signs exposed to moisture, you will need an appropriately rated outdoor driver.
Add up the total wattage of your LED modules or strips on the circuit, then choose a driver with at least 20% extra headroom.
Small signs and short strip runs → usually 40 W
Medium lightboxes or longer runs → usually 75 W
Large indoor lightboxes and long strip runs → often 150 W
Your installer can confirm the right size for each job.
Yes. Each model comes with a factory-fitted AU mains plug on the input side for quick testing and installation. The LED load connects via screw terminals on the output side.
All indoor 12 V transformers in this range are backed by a 3-year warranty when used as specified. Incorrect wiring, overloading or use in outdoor/wet environments is not covered.
